ios 6.1.3 iPhone 4 / iPhone 3GS / iPod Touch 4G အတြက္ Jailbreak

By
Note 1: This guide describes a tethered jailbreak for A4 devices (iPhone 4, iPhone 3GS, iPod touch 4G) using the latest redsn0w version only 


ဒီ Guide က (iPhone 4, iPhone 3GS, iPod touch 4G) 6.1.3 Firmware မ်ားအတြက္သာျဖစ္ပါတယ္

လိုအပ္ေသာ File မ်ား ေဒါင္းေပးပါ

Download Redsn0w 0.9.15b3 [ Windows ] အတြက္
Download Redsn0w 0.9.15b3 [ Mac ] အတြက္
Download iOS 6.0 အတြက္ iPhone 4 /3GS, iPod touch 4G FirmwareStep 1: Download iOS 6.0 firmware or newer.

6.0 Firmware ကိုေဒါင္းထားပါ

Step 2: Download Redsn0w 0.9.15b3 from the links above.

Redsn0w 0.9.15b3 ကိုေဒါင္းပါ

Step 3: Connect your ( iPhone 4 / iPhone 3GS / iPod Touch 4G ) to your computer.

မိမိရဲ႕ iPhone 4 / iPhone 3GS / iPod Touch 4G ကို မိမိ ကြန္ပ်ဴတာမွာ ခ်ိတ္ပါ



Step 4: Double click the redsn0w zip file and extract it. Navigate to the extracted redsn0w folder, and launch the redsn0w application.

ေဒါင္းယူထားေသာ redsn0w .zip ကို ျဖည္ပါ

Windows XP နဲ႔ Windows 7 မွာ right click Administrator နဲ႔ run ပါ

Step 5: Click on ‘Extras‘, then click on ‘Select IPSW‘. Point redsn0w to the 6.0 firmware, which you downloaded in step 1.

Extras ကို ႏွိပ္ၿပီး Select IPSW ေနရာမွာ မိမိ ဖုန္းႏွင့္ သက္ဆိုင္ေသာ 6.0 ios firmware ကိုေရြးေပးပါ





Step 6: Go back to redsn0w’s welcome page, and click the ‘Jailbreak’ button.

ထိုေနာက္ ေနာက္သို႔ ျပန္ထြက္ပါၿပီး Jailbreak button ကို ႏွိပ္ပါ


Step 7: Redsn0w should now start preparing the jailbreak data.

Redsn0w စတင္ၿပီး အလုပ္လုပ္ပါၿပီ


Step 8: Now you may select your jailbreak options – we only recommend that ‘Cydia‘ is selected. Then click ‘Next‘ to continue.

Cydia ကိုအမွန္ျခစ္ေပးၿပီး Next ကို ႏွိပ္ပါ ...။

Step 9: Now you will have to put your device into DFU mode. Redsn0w will guide you through the steps below:

Redsn0w မွ DFU mode ကိုခ်ိန္းခုိင္းပါလိမ့္မယ္
DFU mode သို႔ ၀င္ရန္

Hold down the power button (on top of your device) for 3 seconds.
Power Button ကို 3 စကၠန္႔ ဖိေပးပါ
Then, without releasing the power button, hold down the home button and keep the two buttons pressed for 10 seconds.
Power Button ကိုဖိထားရင္း နဲ႔ Home Button တြဲၿပီး 10 စကၠန္႔ ႏွိပ္ပါ
Now release the power button, but keep holding the home button down until redsn0w detects your device.
ၿပီးရင္ Power Button ကို လြတ္ၿပီး Home Button ကို 15 စကၠန္႔ ဖိထားလိုက္ပါ
Next > Next> လမ္းေၾကာင္းအတိုင္း ေရြးေပးပါ






Step 10: After redsn0w detects your device, and if everything has gone successfully, then your device will reboot, and a pineapple logo will appear, indicating a tethered boot. You will now have to wait for the process to complete
Once it is complete, you should see the lock screen on your iOS device but Cydia still missing

ၿပီးရင္ေတာ့ ဖုန္းက reboot က်ၿပီး Pineapple Logo ေလးမွာ အလုပ္လုပ္ေနပါလိမ့္မယ္ ဒါဆို ကၽြန္ေတာ္တို႔ 6.1.3 ကို Jailbreak ျပဳလုပ္တာ ၿပီးပါၿပီ ...။

ဒီ Guide က iPhone 4 , iPhone 3gs, iPod Touch 4G အတြက္ပဲျဖစ္ပါတယ္ ပါ၀ါ ပိတ္လို႔ မရပါ

ပါ၀ါ ပိတ္ရင္ ျပန္ပြင့္ဖို႔ အတြက္ Just Boot ျပန္ႏိုးေပးရပါတယ္ ...။

အဆင္ေျပပါေစ ...။

Credit: Ko Nay (newusersformobile)

ဆက်စပ်ဖတ်ရှုရန် အကြောင်းအရာများ...